DON'T FORGET YOUR SERVO!
NITROPRO FK-N650 Servo
Sold out
Operating Voltage: 4.8-8.4 V
Operating speed:
0.140sec/60° @ 6.0V
Operating speed: 0.120sec/60° @ 7.4V
Operating speed: 0.105sec/60° @ 8.4V
Stall Torque: 35 kg-cm (486 oz-in) @ 6.0V
Stall Torque: 42 kg-cm (584 oz-in) @ 7.4V
Stall Torque: 47 kg-cm (653 oz-in) @ 8.4V
Gear: PATENTED STAINLESS STEEL
Motor: BLS
Size: 40*20*41.5mm (1.57 x 0.78 x 1.63 in) Weight: 85g
Connector Wire: JR 300 mm
Triple Ball bearing
These are Waterproof!!
Still have some reaper ones and the all new skull ones. Please let me know which you would like. Thanks
NITROPRO FK-NTUG-IT SERVO WINCH
Sold out
This is one bad ass little servo winch!! Don't let the size full you, this is a 460 oz servo winch at 8.4v! We have tested multiple times, she can dead lift 20lbs and barely break a sweat!
Fully IP67 waterproof
cnced case
stainless gears
Lifetime gear warranty
No need for external servo controller, Hook it up in your receiver. Make that channel a 3 position switch and let get fly!!
Caution KEEP YOUR FINGERS OUT OF THE LINE!!!
Includes:
Servo winch
Spool
Cable
Hook
Winch Line
Only a few left!
Here is our Winch line. This line is 100% scale to what the 1:1 rigs are running. Same material blend, even down to the same style of weaving... Amazing winch line with massive strength!!
Standard-.8mm Thick 220lb B.S.
HD-1mm thick 350lb B.S.
COMES IN 10FT LENGTH
SERVO HORN 7075 BILLET NONE CLAMPING 25t
Sold out
Here is our strongest servo horn yet, Billet 7075 none clamping. Just so you don't have to worry about those pesky little screws breaking or coming loose!!
Color: Black/Red
Teeth: 25t
Winch Hook Carbon/ Aluminum
Great lightweight functional point!
These are Extremely strong! and literally weigh nothing. If your already running a pull pall bolt one of these on somewhere for another functional point without adding weight!!
Nitro Pro Mini 460 V2
Sold out
Here we have the Nitro Pro mini 460 V2. This is a low pro servo with 460oz of torque at 8.4v. Fully cnced case
Ip67 Waterproof
Lighting Fast, Specs below, Awesome for rear steer, dig servo or even someone that is weight cautious and still wants close to 500ozs
SPECS ARE IN THE LAST PICTURE!!
LIFETIME GEAR WARRANTY
CCW 4x5" Sticker Sheet
Sold out
This is our 4x5" Sticker sheet. These sticker are waterproof and in multiple colors! Add that perfect touch to your rig!!
VIDAR SERVO Direct Power
Sold out
Here it is!!! THE VIDAR! This is the crawler servo that Nitropro and Corrupt carbon works built together. We wanted to bring that same great quality, speed and power from Nitro pro to the crawlers. This is it!!
Cnc case
Ip67 Waterproof
Lifetime Gear Warranty
Direct Power servo (hooks to JST Plug off your power leads) Up to 3s! The signal wire goes to receiver.
Size specs in Pictures
25t spline
Unload Current:
360 mA@ 10.8V
450 mA@ 12.0V
480 mA@ 12.6V
530 mA@ 14.4V
Loading Current:
3600 [email protected]
3900 mA@ 10.8V
4500 mA@ 12.0V
4800 mA @ 12.6V
5200 mA@ 14.4V
Stall Torque:
40.0 kg-cm (667 oz-in)@ 9.9V
46.0 kg-cm (667 oz-in) @ 10.8V
57.0 kg-cm (792 oz-in)@ 12.0V
60.0 kg-cm (834 oz-in)@ 12.6V
66.0 kg-cm (917 oz-in)@ 14.4V
Operating Speed:
0.155 sec/ 60° @ 9.9V
0.145 sec/ 60° @ 10.8V
0.125 sec/60° @ 12 .0V
0.120 sec/60° @ 12.6V
0.105 sec/60° @ 14.4V
CCW SUPER SERVO ARM 25t
Sold out
This is the strongest servo we have ever made!! Fits 25t spline servos
Comes built, all screws are also thread locked with our Shark Bite Lock Tight!
When bolting link to arms please use washer on both sides and lock nut.
Contains:
Lightweight aluminum hub
8-6/32 stainless screws
1- 3mm thick servo arm.
ARM LENGTH IS 24MM
Servo winch spool 25t
This is your typical winch spool for a 25t servo winch. Comes with wire (we recommend to just use this as scale point.) Also comes with screw and metal shackle. Very nice and dependable package.
We highly recommend our servo line with this setup! can spool close to 10ft of the HD and at least 10ft of out standard.