VRD CARBON - KIT
VRD CARBON KIT
The Vanquish Products VRD Carbon Kit is our very first competition level platform brought to life by some of the industry's most experienced designers in the RC rock crawling segment. Utilizing an all new Lightweight Spec VFD Transmission and updated F10 competition inspired portal axles the VRD Carbon Kit is a highly competitive, predictable and versatile platform. The heart of the VRD Carbon Kit is a matte finish 3mm thick pair of carbon fiber frame rails mated to the 6 degree flat skid plate. The molded chassis components and skid plate place the lightweight spec VFD transmission as low as possible into the VRD chassis. For the first time the front F10 Portal axle is equipped with a servo on axle and 4-link. Front and rear axles include weighted brass tube inserts in addition to the front alloy knuckle weights to keep the center of gravity as low as possible, translating to a high performance driving experience.
- Lightweight Spec VFD Transmission
- 3mm Matte Carbon Fiber Frame Rails - 6 degree flat skid plate
- 37% Overdrive
- F10 Portal Axles
- Brass weight tubes in axles
- Alloy heavy portal knuckle weights
- Front Axle Overdrive Portal gears
- Rear Axle Standard Portal Gears
- Lightweight Machined Chromoly VFD Transmission Gears
- Machined Spool, Ring Gear, Pinion gear in axles
- Chromoly Universal axle shafts
- Hard Anodized Shock Bodies
- Stainless Steel Links with HD Bent rear links
- Incision Pro M4 Rod Ends
- Stamped Aluminum Rock Sliders
- Adjustable multi point body mounting system
Chassis
The Vanquish Products VRD Carbon chassis is equipped with all new molded chassis components that provide a tunable platform to adapt to the most demanding terrain. Multiple shock and body mounting positions combined with minimalistic front/rear interchangeable bumpers make body mounting and fitment straight forward. Stamped aluminum rock sliders provide a flat location for electronics and/or battery mounting and are able to support and protect your body.
Drivetrain
The center of the VRD Carbon Kit is the new lightweight spec VFD transmission. Equipped with a lightweight machined aluminum motor plate, aluminum motor plate standoffs, while omitting the cosmetic VFD tunnel for a high performance appearance. Internally the VFD is equipped with machined aluminum bearing plates and machined lightweight chromoly gears. Each internal gear has been re-designed to be as lightweight as possible dropping the weight of the overall transmission but maintaining a high level of durability. The T-Case has a built in 21% overdrive.
The Front F10 Portal axle has overdrive portal gears while the Rear F10 portal axle has the standard ratio gears, combined with the VFD overdrive the final overdrive percentage is 37%. Both axles include brass weighted tubes inside in addition to the alloy portal knuckle covers on the front axle. This is the heaviest spec F10 axle yet keeping the center of gravity as low as possible and the weight bias forward.
Suspension
The VRD Carbon Kit includes the Incision S8E shocks with hard anodized shock bodies and multiple length tuning rod ends for a final length range of 85-95mm. Heavy duty stainless steel lower suspension links and lightweight upper links connect the chassis to the axles with the new Incision Pro M4 rod ends. The rear lower links are bent for maximum breakover clearance. Multiple shock mounting locations and tunable shock length allow for a high range of ride height and breakover adjustment.
Specifications
- 1/10th Scale
- Front Axle Ratio 5.25:1
- Rear Axle Ratio 6.25:1
- Pinion 15T 32P
- Spur 52T 32P
- Overall Width Hex to Hex - 200mm (7.87”)
- Wheelbase - 322mm (12.67”)
- Overall Front Ratio 46.5:1
- Overall Rear Ratio 68:1
- Final Overdrive 37%
Required Items to Complete:
- Tools
- Paint
- Comp Style Body
- 1.9 x 4.75” Tires (recommended)
- 1.9 Wheels (Vanquish Products or SLW Hub Compatible wheels required)
- Transmitter / Receiver
- Steering servo (25 spline 20mm Servo Horn included)
- 540 Motor
- ESC
- Battery (35mm x 35mm x 100mm Maximum)
- Charger
!!DON'T FORGET!!
Battle Axe 2.0 (VRD SWAP CHASSIS)
Only a few left!
IT'S BACK!! Battle Axe 2.0 is our VRD based chassis. This chassis is a straight swap over for the RTR Stance and VRD carbon kits.
Benefits of the chassis
9 degrees of breakover
More chassis clearance
More shock hoop adjustments
Made of Forged/T700 carbon for that perfect balance of strength to weight ratio.
INCLUDES: 2 CHASSIS RAILS, THAT IS IT!
CAUTION THEY ARE VERY SHARP! CUSTOMER ASSUMES RESPONSIBILTY.
CAUTION THIS WILL LEAD TO MORE CORRUPTION!!
THIS IS A CUSTOM CHASSIS, SOME THINGS MIGHT NOT BE PERFECT BUT IT DOES WORK!
BRASS F10 PORTAL KNUCKLE WEIGHT
Sold out
The Vanquish Products Brass F10 Portal Knuckle Weights are a direct replacement for the F10 Portal knuckle covers. Compatible with the plastic VPS08607 or the machined aluminum VPS8640 / VPS8641 F10 portal knuckles.
The Brass F10 Knuckle weights are built to maximize the down low weight and lower your COG. Weighin in at over 120 grams these are the heaviest F10 knuckle weights on the market. Made in the USA with domestic sourced brass.
Features:
Machined in the USA
Made from high quality domestic sourced brass
Direct replacement for F10 Front Portal Knuckle covers
Machine engraved Vanquish Products and logo
Over 120 grams per piece. 2 per package.
Package includes:
X2 Brass F10 Portal Knuckle Weights
BRASS F10 REAR PORTAL COVER WEIGHT
Sold out
The Vanquish Products Brass F10 Rear Portal Cover Weights are a direct replacement for the F10 Portal rear covers. Compatible with the plastic VPS08605 or the machined aluminum VPS8617 & VPS8618 F10 rear portal housings.
The Brass F10 portal cover weights are built to add weight below the centerline of the axle to lower your COG. These covers weigh in at over ____ g . Made in the USA with domestic sourced brass.
Features:
- Machined in the USA
- Made from high quality domestic sourced brass
- Direct replacement for F10 rear portal covers
- Machine engraved Vanquish Products logo
- Over grams per piece. 2 per package.
Package includes:
- X2 Brass F10 Rear Portal Cover Weights
*All bearings, hardware, gears, axle shafts, etc are reused.
***Please refer to VPS09007 or VPS08601 instruction manuals for replacement assembly instructions.
BRASS F10 PORTAL KNUCKLE WEIGHT - LOW OFFSET
Sold out
These Vanquish Products Brass F10 Portal Knuckle Weights are a low offset version allowing the use of a 225 SLW hub and will clear 0.8 or 1.0 wide Vanquish Products Wheels.
These are a direct replacement for the F10 Portal knuckle covers. Compatible with the plastic VPS08607 or the machined aluminum VPS8640 / VPS8641 F10 portal knuckles.
The Brass F10 Knuckle weights are built to maximize the down low weight and lower your COG. Weighing in at over 82 grams. Made in the USA with domestic sourced brass.
Features:
Machined in the USA
Made from high quality domestic sourced brass
Direct replacement for F10 Front Portal Knuckle covers
Machine engraved Vanquish Products and logo
Over 82 grams per piece. 2 per package.
Allows for low offset 225 SLW Hubs and Vanquish Products wheels to clear the knuckle weight for the narrowest possible overall width with F10 Portals.
Will clear with Molded Incision wheels and #4 hubs (Wheels included in VPS09007, VPS09008, VPS09011)
We cannot guarantee the fitment of other manufactures wheels
Package includes:
X2 Brass F10 Portal Knuckle Weights - Low Offset
*Replaces knuckle covers from VPS09007 and VPS08600. All bearings, hardware, gears, axle shafts, etc are reused.
***Please refer to VPS09007 or VPS08600 instruction manuals for replacement assembly instructions.