LANDSHARK CHASSIS
This is our Podium proven chassis. Built for the scx10,10ii platform this chassis get you low and mean!
Tons of shock hoop adjustments
Tons of upper link adjustments
If your wanting to build a comp based scaler and turn some serious heads... HERE YOU GO!
Material Choices:
Carbon Fiber- Strong and lightest
G10- Flexible and a tad heavier then carbon fiber
Aluminum- 7075, Strong and Lightweight
Steel- Heavy but super strong
Products you might also like!!
Unicorn Body Mounts
THESE CAN BE TRIMMED TO SMALLER WIDTHS, VERY EASY!
These are great addition to anyone building a truck. These are body mounts that also act as a brace. With a 1/4-20 stud coming up through the body and nuts to hold the body in place, you will never have to worry what you did with those body clips or will my clips fall out during the comp. Nuts are included in price (just not pictured)
Only available in black!
Sold in Pairs (2)
Available in 70 and 78mm now
High Clearance scx10
Only a few left!
This is the best skid out on the market. Took me a very long time to find someone I could trust to make a product that I would be proud to put Corrupts name on it. Teamed up with Fish's Crawler parts to give you the very best!
Angled link mounts for better geometry
Holes set for left or right mounting, (mirrored or not)
These skids are extremely strong and podium proven time and time again!
These also fit the Element Enduro
78mm width is factory scx10 and 10ii width
70mm is really only to be used at a tcase skid for TGH Creeper T or anything with scx10 bolt pattern.
USE 78MM WITH FULL SIZE TRANS!!!
High Clearance Hamberger/cheesberger skid
Only a few left!
THIS SKID IS FOR THE DLUX HAMBERGER/CHEESEBERGER TRANS!!!This is the best skid out on the market. Took me a very long time to find someone I could trust to make a product that I would be proud to put Corrupts name on it. Teamed up with Fish's Crawler parts to give you the very best!
Angled link mounts for better geometry
Holes set for left or right mounting, also forward and back.
No need to use the adapter plate that comes with the trans with these amazing skids!
These skids are extremely strong and podium proven time and time again!
Comp Bumper
Only a few left!
These Bumpers are here for you to use front or rear, crazy strong. They do meet sorrca rules, once mounted the bumper does come out past rails... Not much! but that's how we like to play!! lol
Available in 70 and 78mm now.
78mm 3d printed braces
Printed braces from Fish's crawler parts. Same high quality print and material you are used to from all the printed items. Crazy strong and looks amazing! 78mm is the factory width of a scx10 skid. These would keep your chassis square.
70mm Printed Braces
These are 3d printed Braces from Fishs Crawler Parts. Extremely strong and very nice looking!! Same high quality print and material all the prints are made from!!! 70mm is the factory width front and back of a scx10
70mm Lightweight Alum Braces
Sold out
These take m3 hardware, measure 70mm in length and 5mm around. Stupid lightweight, take away some of the up high weight with these!! All 4 braces don't even weight .5oz!!!
Universal Battery Mount kit
Sold out
This kit is for you to mount a battery plate on just about any chassis there is! This mount acts as a brace also!! 78mm wide (can be cut down to 70mm with taking 4mm of each side) this is the strongest and easiest way to mount a battery. Also comes with that so amazing KNK stainless hardware
Thickness of battery plate will vary!
Kit includes
1-carbon battery plate
1-mount/brace
2-12mm Stainless button heads (KNK)
2-10mm Stainless button heads (KNK)
2-4mm thick carbon spacers
Forward motor mount scx10
Sold out
This forward motor mount for the scx10 style transmission! This is a great combo for our REAPER chassis. Team this up with your favorite scx10 style trans and our angled skid to keep the trans level in the chassis. You are looking at one winning combo for sure!!!
FORWARD MOTOR MOUNT ONLY!!
Includes All hardware needed to install! KNK Stainless Hardware!