Super Shafty Falcon 1.9 wheels
Here you go!! Super Shafty Falcon Wheels with Custom Corrupt Carbon Works beadlock rings!!
Designed from the ground up to mimic the performance of the successful 2.2 SuperShafty Hawk's, the Falcon 1.9 wheels incorporate the lightweight design, 3 piece beadlock system, and Vanquish SLW hub mount design. The deep offset will allow you to tuck your wheels to your minimum operating width. This will reduce the scrub radius of the tire, allowing the steering servo to work more freely while turning the tires.
The groove around the outside of the wheel helps to capture the foams in place for increased side hill performance by not allowing the tire to "roll-over" on themselves.
The SuperShafty 1.9 "Falcon" utilizes a fake hole design on the beadlock rings. This allows you to install the beadlock using the 6 supplied 2mm bolts, and use the fake holes to fill in the rest of the blank spots. The fake holes are threaded and you will be able to use the supplied 2x6mm screws to complete the wheel.
(96) M2x6mm buttonheads to complete the wheels
6 spoke design
1.9 wheel size
SLW mounting hub pattern (Suggested for use with 600 or larger hubs for stock ish offset)
AVAILABLE IN 2 CHOICES:
- 18 HOLE FRONT RINGS WITH 6 HOLE REAR RINGS
- 6 HOLE FRONT AND REAR RINGS.