Enduro Shock Hoops
These are made for you to have more shock placement choices. These shock hoops will allow you to lay the shocks forward, also resulting in lowering the rig itself. These teamed up with a high clearance skid is just the ticket needed for your Enduro!
NOTE: Will need to modify or make a panhard mount as the factory is built into the shock hoop. Some are just taking the hard one and trimming off the rest that's not needed. Can see in the last picture.
Made from solid Pure 3k carbon fiber. 3mm
Enduro Battery mount kit
This is a battery kit mount, includes everything you need to mount our 2100mah carbon battery plate up front. All you need to do is trim 4mm off each end with a tiny hand saw. Also includes the Servo tabs to mount in factory holes to keep the plate off the driveshaft. BUT it allows for a sweet rock light mounting area!
1-Carbon battery plate
4-stainless screws (KNK)
2- 4mm spacers
1-battery plate mount (this is what you need to trim 4mm off of each end)
Element Battle Axe kit
OK what we have here is a kit for you element guys! This requires some work, to make it happen but not much. From what Im told, drill one hole for the panhard mount and make a new panhard link. With a little work everything else bolts up.
Carbon Battle axe chassis
High clearance skid
(4) 70mm braces
Battery mount kit
Not 100% bolt on but pretty dang close so Im told
Use the factory CMS mount.
High Clearance scx10&Enduro 78mm
This is the best skid out on the market. Took me a very long time to find someone I could trust to make a product that I would be proud to put Corrupts name on it. Teamed up with Fishs Crawler parts to give you the very best!
Angled link mounts for better geometry
Holes set for left or right mounting, (mirrored or not)
These skids are extremely strong and podium proven time and time again!
These also fit the Element Enduro